The insulation in the 150 appeared to be original. It was a fiberglass type substance that turns to dust when messed with. I really like to fly with the windows open in the summer and since the interior plastic was in such bad shape it was free to blow in places. We removed all of this anyway as part of the inspection and for the opportunity to re-zinc chromate the metal. The new insulation which we bought from Aircraft Spruce comes in a roll that is two feet wide and as long as you want. It has aluminum like backing on both sides and is made of what looks like newspaper stuff. It is very easy to work with and can be cut with scissors. It is not an irritant like fiberglass. Every time I work with fiberglass insulation, I spend days picking out tiny pieces of it from my skin. To install the stuff just cut it and spray some contact cement on the backing and the plane interior and stick it in after it drys for about 30 seconds. This was one of the easiest jobs in the restoration. I am looking forward to a quieter and more friendly ride.
Showing posts with label aircraft maintenance. Show all posts
Showing posts with label aircraft maintenance. Show all posts
Friday, August 21, 2009
Thursday, August 20, 2009
Rejuvenation - Skining the floats
It took as long or longer to pull the bottoms off as it did to replace them. Once the skins were off we could really inspect the insides of the floats. They were really in pretty good shape. We also decided to replace the middle and front bulkheads. One was dented really badly, and the middle bulkheads were pretty corroded. Now was the time to do it while the skins were off. This process took about a month. We ordered new parts from EDO, the float manufacturer, and Peck Aero Products in Canada. http://peckaero.com/ Ed Peck owns the operation and he was very very knowlegable and helpful. He even offered to reskin the floats for me. I winced at the thought of all that shipping and delay. In hindsight it might have been a good plan. We learned many lessons pulling these things apart and putting them back together that I am sure Ed learn a long long time ago and not at the expense of my time and the quality of the job that we did on my floats. I had lots fo bonding time with my mechanic and I learned a ton. I probably spent $3250 on float parts. They were all very pretty and shiney and new when they arrived. We used the old skins for a template for the new ones and we got to drill thousands of new holes in these very shiney and new parts. Once all the holes were drilled we started assembly. This was very exciting to see. I had witness so much destruction as the dead parts were removed and now they were being replaced with shiney new parts. When the float skins come off the float loses a bunch of its strength and the become flimsey. As the new parts were added back on everything became strong again. Very satisfying. I was starting to get the itch to fly the plane really badly now. All the ribs and doublers were added to the bottom skins before they were applied to the rest of the float. This made the rivets much easier to install. There are only about 40-50 rivets that have to be installed using two people. One person is on the bottom of the float shooting the rivets while the other is reaching in through the inspection hole trying to buck the rivet. Doing all of this you end up covered in sealant as well. We used latex glove for most of this process and the sealant would really stick to everything. The sealant is a two part substance that actually mixes inside the tube and it has a relatively short shelf life of 6 weeks and a working time that you can choose when you buy the tube. Some of the stains from the sealant will be a part of my wardrobe for years to come.
Labels:
aircraft maintenance,
airplanes,
floats,
seaplanes,
skinning floats
Monday, July 20, 2009
Big toys for little repairs
Finally I found a crack in the forward cross bar that connects the floats to the plane. You could not see the crack unless you looked inside the engine compartment. No more flying would occur until we found a new part and fixed it. The plane would have to be lifted and the engine separately lifted in order to replace this part, since the plane sits on it and the engine connects to the plane through this part. I arranged for my mechanic, Kevin Williams, to come up and look and replace it once I found the part. Buying parts for a rare bird (there are not many Cessna 150 seaplanes) that is 40 years old can sometimes be an adventure. In this case it was fairly easy.
Now I had to find a way to lift the plane. The airplane is built to be lifted by 4 rings located on the tops of the wings. Land planes can generally be jacked up, but this does not work for straight floatplanes which may need to be swapped from land gear to water gear. If we were at an airport with a hangar we could have lifted it with a chain hoist, but here at the lake this is not an option. I investigated a local marina with a huge forklift for boats, but we would not be able to get the plane out of the water safely there. I called the RSC equipment rental people in Alexander City. They hooked me up with a fork lift with an extendable arm capable of lifting 6,000lbs. They were very helpful and delivered the monster as well as demonstrated how to work it.
Everything came together nicely. I had an aircraft mechanic, a huge lifting mechanism, my new part, and good weather. The whole operation took place in a few hours. We only had to remove and replace a few critical and terribly placed bolts. We got big man points and testosterone from operating the large machine and accomplishing our goal. We even got to watch Kevin drive two trucks home. One truck was on the trailer that we used to pull the broken seaplane out of the water, but it was still a sight to see.
I had a excellent flight that afternoon and proclaimed the seaplane to be the best lake toy ever.
Subscribe to:
Posts (Atom)